Using advanced 64 bit processing the unit can take on the most advanced applications. Its 300 DPI resolution will cover all speed applications.

Maximum Print Speed: 16" per second
Print Method: Direct Thermal and Thermal Transfer
Printhead type: Near Edge
Print Resolution: 305 DPI
Ribbon Saver: Standard stepper motor driven
Memory Card Slot: Standard. One slot for compact flash card
Universal Signal Interface: 5v signal levels, optional 24v signal levels (error, ribbon out, media out, end print, ribbon low, data, ready, start print, reprint, feed pause)

Media Characteristics
Label Length: From 0.2" up to 39" (100mm)
Media Type: Die cut or eye mark
Media sensing: Transmissive light sensor-adjustable from 0.8"-31.5" (2-80mm)
     -Optional reflective sensor
Supply roll: I.D 1.5, 3,4 (38,76,102 MM)
     -O.D. 11.8" (300mm), max, roll weight 26.5 lbs. (12kg)
Ribbon: 1" (25mm) ribbon core, 3280' (1000m) length
Character/Fonts: 17 fonts including OCR-A and OCR-B, 2 scalable fonts
     -Additional fonts available in memory card.
Graphic formats: Avery Dennison 4 bit graphic (.EPT) format, and industry standard >BMP, ..PCX, .TIF, .GIF, and .EPS formats
Barcodes: EAN 8 and 13, UPC-A and E, Code 93, Interleaved 2/5, Code 2/5, Code 39 and 128, UCC/EAN 128, Code 128, Codebar, UPC bookland (2 digit and 5 digit extension), ITF, MSI, Post Code, Code 128 (UPS) 2-D (PDF417, Data Matrix, Maxicode
Standard Interface: RS-232/422/485, 300 to 115,000 baud
     -Parallel, (Centronics),
Options: Wireless, Ethernet, Twin Coax

Electrical
Input voltage: 90-270 VAC, 50/60 HZ auto sensing
Power consumption: ALX 924/925 650VA ALX 926: 850VA

Physical
Operating temperature: 41 F to 95 F (5C to 35C)
Humidity: 45-75% noncondensing

Options
Flash cards, direct apply, tamp applicator, roll-on applicator, corner wrap, blow-on, Applicator Interface boards-Online/Offline status, product sensor, blow applicator, bad tag signal